برچسب: S1RII

  • Panasonic Announces Lumix S1RII with 8K Video

    Panasonic Announces Lumix S1RII with 8K Video


    It’s been more than five years since Panasonic launched their Lumix S1R and Lumix S1 full-frame mirrorless cameras with an emphasis on photography and video, respectively. Now the follow-up photo-centric model—the Lumix S1RII—has finally landed, and there are few similarities between the old and new cameras. Built around a new 44.3-megapixel BSI CMOS image sensor and L² image processing engine, the S1RII is significantly smaller and lighter than its predecessor—so we can expect a slew of new underwater housings.

    Promising the “best photos” of any Lumix camera, Panasonic says the new sensor offers a stop better noise performance as well as improved color rendering. Like other recent Panasonic cameras, the S1RII boasts Phase Hybrid AF featuring 779 phase-detect AF points as well as AI-powered subject detection and tracking. Using the mechanical shutter, you get an impressive 10fps burst shooting with continuous autofocus, while the electronic shutter offers 40fps. Another significant improvement is the in-body image stabilization, which delivers up to eight stops of shake reduction with shorter lenses or seven stops with compatible telephoto lenses. It’s worth noting that the camera’s maximum flash sync speed is now 1/250s, which is—unfortunately—inferior to its predecessor’s 1/320s.

    On the video side, the specs are equally impressive: The S1RII is the first Lumix camera to record 8K/30p 10-bit video with 14 stops of dynamic range. The camera can also record internal Apple ProRes RAW HQ/ProRes RAW 5.8K to a CFexpress Type B card (albeit with an APS-C crop)—another first for the Lumix S series. Other recording options include (oversampled) 6.4K open-gate video for flexible cropping and reframing, and (subsampled) 4K/120p slow-motion capture. Serious videographers will also appreciate the advanced video assist tools, including waveforms and vector scopes for exposure and color monitoring, and real-time LUTs.

    To round things off, the S1RII has dual card slots (CFexpress Type B, UHS-II SD), support for external recording to an SSD, a 5.76M-dot OLED EVF (0.78x magnification) and a 1.83M-dot 3-inch vari-angle rear LCD. The camera uses the same battery as the S5II/S5IIX.

    Available now from retailers such as Backscatter, the Panasonic Lumix S1RII is priced at $3,300.

     



    When purchasing underwater photography equipment like the products mentioned in this article, please support DPG by supporting our retail partner—Backscatter.com.



    PRESS RELEASE

    Panasonic Announces New LUMIX S1RII Full-Frame Mirrorless Camera

    Newark, N.J. (February 25, 2025) – Panasonic is proud to introduce the new LUMIX S1RII – the latest high- resolution model of the Full-Frame mirrorless LUMIX S Series.

    The LUMIX S1RII features a newly developed 44.3MP BSI CMOS sensor and high-performance engine with L2 Technology that work together to deliver impressive stills and videos with LUMIX’s esteemed natural color science. The high-resolution mode, allowing for handheld shooting at approximately 177MP, enables users to enjoy the presence and detail of subjects. With revolutionary video performance, it is the first LUMIX camera to realize 8K video recording at 14 stops1 of dynamic range, broadening the possibilities of video creation. The popular Open Gate feature has been enhanced, allowing to shoot in 6.4K, and even up to 8.1K/7.2K2 with a future firmware update. Furthermore, as a first for the LUMIX S series, it supports internal recording of 5.8K Apple ProRes RAW HQ/ProRes RAW3 to a CFexpress Type B card. This makes it possible to record high- quality video data with minimal setup and without using external devices or cables, providing greater mobility for one-man operations and small-scale shoots.

    Evolved real-time recognition Phase Hybrid AF, now with AI tracking, quickly and precisely detects human eyes and faces and follows a subject’s movements smoothly. With high-speed continuous shooting at approximately 40 fps4 and AF tracking, dynamic subjects can be captured accurately and effortlessly. The SH pre-burst mode even starts taking pictures before the shutter is fully pressed, ensuring you never miss a shot.

    Our widely acclaimed image stabilization system continues to improve, with the LUMIX S1RII achieving 8.0-stop shutter speed compensation5 with in-body stabilization, and 7.0-stop6 even in the telephoto range with Dual I.S. 2. The advanced video image stabilization features cropless E.I.S. video distortion correction, reducing peripheral distortion while preserving the original angle of view. This allows for greater flexibility in handheld wide-angle shooting. The newly designed compact body and the tilt and free-angle monitor are adaptable to any shooting style, making it an excellent companion for those seeking both mobility and creative flexibility.

    The LUMIX S1RII will be compatible with the “LUMIX Lab” smart phone application, enabling you to load LUTs directly into the camera. This streamlines the post-production process, allowing for smoother client deliveries and giving you more time to focus on creativity. A new “LUMIX Flow” app will be launched to enhance production workflows across various scenarios, such as short films, documentaries, music videos, and corporate promotional videos. This app offers a range of features, from storyboard creation and shooting to file organization. The LUMIX S1RII integrates with third party software such as “Frame.io” for more efficient postproduction and collaboration. For the first time in LUMIX history, the LUMIX S1RII supports tethering via “Capture One,” assisting a diverse range of creators across various production scenarios.

    Guided by our philosophy of creating technology that fuels creative passion, the LUMIX S1RII is a next-generation mirrorless camera built for creators who want to bring their own unique vision to life.

    Main Features

    • High resolution and high image quality for both stills and videos with a newly developed sensor and next-generation engine

      • Utilizes a newly developed approximately 44.3MP full-frame BSI CMOS image sensor.
      • Features a 177MP (approx.) handheld high-resolution mode that captures the immersive presence and details of subjects with precision.
      • Offers high-resolution recording that captures the texture and fine details of subjects and supports LUMIX’s first 8K 30p video recording (*2) with 14 stops (*1) of dynamic range.
      • Supports 5.8K Apple ProRes RAW HQ / ProRes RAW internal recording to a CFexpress Type B card.

    • Enhanced core performance that unlocks new creative possibilities

      • Redefined real-time recognition Phase Hybrid AF with improved eye and face detection and AI-driven tracking accuracy for people.
      • Enhanced 8.0-stop (*3) in-body image stabilization (B.I.S.) and newly developed cropless E.I.S. video distortion correction, which stabilizes without cropping the angle of view.
      • High resolution and high-speed continuous shooting, offering approximately 40 fps (*2) with the electronic shutter “SH” mode, and an extended continuous shooting “H+ (High Speed Plus)” mode of approximately 10 fps (*2) with a mechanical shutter, allowing you to experience post

        view blackout-free shooting.

    • Powerful apps that seamlessly support the production workflow

      • Compatible with “Capture One,” making it the first LUMIX camera to work seamlessly with the widely used editing software in professional studio photography.
      • Compatible with “Frame.io,” enabling smooth progression from shooting to editing, as well as cloud sharing and collaboration.
      • Supports “LUMIX Lab,” simplifying the transfer, editing, and color personalization of photos and videos for seamless smartphone integration and social media sharing.
      • Supports new “LUMIX Flow,” which assists with storyboard creation, on-site checks during filming, and automatic data organization after shooting to support the video production workflow.
      • LUMIX mode: Assists with storyboard creation, on-site checks during filming, and automatic data organization after shooting to support the video production workflow.

        ■ Smartphone mode: Experience the joy of video creation, such as scripting and editing a short drama, documentary video or dance video, with just a smartphone.

        ■ External monitor: Use a smartphone as an external monitor while shooting, allowing you to swiftly change and adjust the camera settings on the mobile device.

    DMW-BG2

    Panasonic is pleased to introduce the new DMW-BG2 battery grip, designed to match the feel of the S1RII when holding the camera vertically. The battery in the battery grip can be exchanged while the camera is on, and the grip also supports providing power to the camera for shooting in certain extensive modes.

    Price and availability

    The new LUMIX S1RII will be available in late March for $3299.99 at valued channel partners.

    1 When Dynamic Range Expansion (Log) is enabled.

    2 8.1K/7.2K Open Gate recording will be available in the firmware update scheduled for 2025.

    3 8.1K / 7.2K RAW HDMI output will be available in the firmware update scheduled for 2025.

    4 The continuous burst shooting speed may decrease depending on various conditions such as the lens used, aperture and shutter speed.

    5 Center: 8.0-stop; Periphery: 7.0-stop. Based on the CIPA 2024 standard [Yaw/Pitch/Roll direction: focusing distance f=60mm when S-R2060 is used. 5-axis.]

    6 Center: 7.0-stop; Periphery: 7.0-stop. Based on the CIPA 2024 standard [Yaw/Pitch/Roll direction: focusing distance f=105mm when S-R24105 is used. 5-axis.]





    Source link

  • Nauticam Unveils Housing for the Panasonic Lumix S1RII

    Nauticam Unveils Housing for the Panasonic Lumix S1RII


    Panasonic may have only just announced the arrival of their flagship photo-centric full-frame mirrorless camera, the S1RII, but Nauticam has wasted no time engineering their matching housing, the NA-S1RII. Much smaller and lighter than its predecessor, the S1RII—arriving five years after its predecessor—boasts a new 44.3MP BSI CMOS image sensor and L² image processing engine, which combine to produce some impressive numbers: 10fps burst shooting with continuous AF using the manual shutter (and 40fps with the electronic shutter) plus 8K/30p 10-bit video recording with 14 stops of dynamic range.

    The new NA-S1RII housing offers all of the features we’ve come to expect from Nauticam: a full complement of dials, levers and buttons ergonomically placed around integrated handles; an M24 bulkhead for attaching external monitors or recorders via HDMI 2.0; full compatibility with the company’s water-contact optics (such as the FCP and EMWL); and vacuum check and leak detection electronics as standard. Built-in fiber optic bulkheads mean it’s a breeze to add a Mini Flash Trigger for rapid-fire manual flash triggering.

    Available now from retailers such as Backscatter, the NA-S1RII is priced at $5,184.

     



    When purchasing underwater photography equipment like the products mentioned in this article, please support DPG by supporting our retail partner—Backscatter.com.



    PRESS RELEASE

    INTRODUCING NA-S1RII

    The Panasonic S1RII

    The Panasonic S1RII seems more of a redesign than an evolution, both in terms of capabilities as well as form factor. The new S1RII is built around a 44MP 8.1K sensor that allows for both high resolution stills capture as well as 8K video at up to 30p with low rolling shutter effect. The S1RII can also record ProRes RAW or 422 at selected resolutions and frame rates. Promising improved autofocus, more in-line with its peers, the S1RII features phase-detection and enhanced subject tracking.

    In addition to an overall smaller footprint, the S1RII also has relocated ‘Movie” mode from the exposure mode dial to a dedicated switch below the drive mode dial. This frees up the exposure dial to have 5 custom mode positions which have discrete settings for stills and video mode.

    In addition to the high-resolution video capture specs, the S1RII also features Panasonic’s dual-gain ISO. A new Dynamic Range Expansion mode can be enabled when shooting in V-Log to gain an additional stop of highlight information.The S1RII also adds a false-color overlay of pixel brightness to help both still and video shooters prevent clipping. Support for real-time LUTs and Open Gate Capture show the S1RII is really a full-featured hybrid camera.

    The Nauticam NA-S1RII Underwater Housing

    The Nauticam NA-S1RII is a professional aluminum underwater housing that delivers fast and intuitive access to all the essential controls of the Panasonic S1RII camera underwater. Pairing the NA-S1RII with Nauticam’s extensive line of Water Contact Optics and accessories further enhances the camera’s already impressive still and video capabilities.


    Premium Professional Optics

    As with the NA-S1R, the NA-S1RII is built around the N120 port system and allows for those moving from the NA-S1R to carry over their port and lens configurations unchanged. This large port opening also allows for a wide range of lenses to be used as well as extensive integration with Nauticam’s Water Contact Optics that offer the best possible underwater image quality.

    Mission Control

    The NA-S1RII allows for efficient camera control underwater with most essential functions placed within easy reach of the ergonomic handles. The S1RII moves the video/still mode selection to a dedicated switch which is now easily accessed with a lever located atop the NA-S1RII allowing for rapid switching underwater.

    Thumb levers near the left and right side handles actuate the image review and AF-ON buttons while levers for Af-mode and switching between the EVF and LCD are also within easy reach.


    HDMI Output

    The NA-S1RII is equipped with the large M24 bulkhead that allows for the use of Nauticam’s HDMI system to attached optional external monitors or recorders. The 8 1/4″-20 holes atop the housing provide a solid base for mounting these or other larger accessories.

    Flash Triggering

    For rapid-fire manual flash triggering, the NA-S1RII is compatible with the Mini Flash Trigger (26305) which uses small LED units to trigger external flashes via Nauticam Universal Fiber Optic Cables (26216).


    Vacuum Check and Leak Detection System

    The Nauticam vacuum check and leak detection electronics are shipped with the NA-S1RII as standard equipment. Combined with an optional accessory vacuum valve (PN 25625) this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing. A simple color coded LED lighting system lets the user know that the vacuum is solid, or that the housing is losing vacuum. Leak detection is built into the same circuit, so if there is water intrusion, an audible and visual indication will occur.

    The Nauticam system is temperature compensated, eliminating false alarms caused by a change in outside temperature, or from a camera heating up on an action packed dive.

    What’s in the box

    • NA-S1RII Housing
    • 90137 Spare main housing o-ring
    • 2x Plugs for Optical fiber cable mount
    • 2x Handles with mounting balls
    • Panasonic CR-2032 Battery (for moisture alarm)
    • Set of Allen Keys
    • Padded housing bag and shoulder strap

     


    Recommended Accessories

    Vacuum Valve

    • 25625 M16 Vacuum Valve II (Pushbutton Release)

    Viewfinder

    • 32212 Nauticam Full Frame Straight Viewfinder (40°/0.8:1)
    • 32214 Nauticam Full Frame Angle Viewfinder (40°/0.8:1)
    • 87213 Reverse Angled Viewfinder for EMWL (40°/0.8:1)
    • 87214 Reverse Straight Viewfinder for EMWL (40°/0.8:1)

      *32212/32214, 87213/87214 are preferred

    Hand Strap

    • 28130 Hand Strap for 28113

    Optical Trigger

    • 26305 mini Flash trigger Fujifilm/Canon/Panasonic

    Housing Mount

    • 25221 M10 strobe mounting ball for housing
    • 25224 M10 strobe mounting ball for housing (with hole for using with lanyard)
    • 17959 Housing Mounting ball with 1/4” screws
    • 17960 Universal Quadra-Pod Plate for Nauticam Housings
    • 25218 mounting ball set for tripod

    Surface USB-PD Power Bank

    •  26325 USB-C Bulkhead with USB-C Connector *Can be installed on either M24 or M16.
    •  26326 M24-M16 Adaptor for use with 26325

      *for use with M24 only

    HDMI Output

    1) Required accessories for HDMI 2.0 Cable System

    • 25086 M24 adaptor for HDMI 2.0 cable (incl. tightening tool)
    • 25099 M24A2R200-M28A1R170 HDMI 2.0 Cable (for NA-a1 to use with Ninja V housing)

    Compatible HDMI 2.0 Monitor Options

    • 17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5” 4kp60 4:2:2 10-bit recorder/monitor/player (excl. HDMI 2.0 cable)
    • 17922S Nauticam Atomos Ninja V-S Housing for Atomos Ninja V 5” 4kp60 4:2:2 10-bit recorder/monitor/player (excl. HDMI 2.0 cable) with Atomos AtomX SDI Module
    • 17926 Nauticam NA-Ultra5 Housing for SmallHD Ultra 5 Camera Monitor

    2) Required accessories for HDMI 1.4 Cable System (can be installed on either the M24 or the M16 accessory port)

    • 25033 Standard HDMI bulkhead with M16 thread (included in 17927)
    • 26326 M24-M16 Adaptor for use with 26325
    • 25075 HDMI (D-A) Cable in 190mm Length for NA-GH5/G9 (for internal connection from HDMI bulkhead to camera)

    Compatible HDMI 1.4 Monitor Options

    • 17927 NA-Shinobi II Housing for Atomos Shinobi II 5.2” HDMI Monitor
    • 17922 Nauticam Atomos Ninja V Housing for Atomos Ninja V 5” 4kp60 4:2:2 10-bit recorder/monitor/player (excl. HDMI 2.0 cable)
    • 25082 HDMI1.4 Cable for Ninja V Housing in 0.75m Length (for connection from Ninja V Housing to HDMI bulkhead) Required for use with 17922

    Technical Specifications

    • Dimensions: 330mm(W) x 200mm (H) x 165mm (D)
    • Weight in air: 2.25kg
    • Buoyance in water: Positive 0.5kg (includes camera and battery)
    • Depth Rating: 100m
    • Port Opening: N120





    Source link